How Do You Know the Battery Is Charged on the Dremel Pet Nail Grooming Kit
DREMEL Cordless Pet Nail Preparation Kit User Guide
CORDLESS PET Smash Preparation KIT
For customer service support and to acquire more nigh what you lot tin can do with your new Dremel
rotary tool go to Dremel.com
WELCOME TO DREMEL!
Thank you for purchasing the Dremel Paw Control! We hope that you find information technology to be 1 of the handiest and almost versatile tools y'all'll awn. This guide has what you need to kickoff training your pet'south nails in a few easy steps.
GETTING TO KNOW THE TOOL
The kit includes Pet Grooming accessories & attachments for both the novice and the experienced groomer. Nosotros recommend using the combination that feels most comfy for y'all and your pet. For freehand training for the experienced groomer, we recommend using the 407 sanding ring & mandrel (Effigy i). For the novice groomer, we recommend using the Nail Grooming Attachment with SD60-PGA Sanding Disc & EZ 402 mandrel (Effigy 2).
BEYOND PET GROOMING!
Dremel is known for its versatility, and your Pet Preparation kit is no different! Dremel Rotary Tools can tackle a diversity of tasks outside of grooming your pet's nails. These handy tools allow y'all to sand, grind, polish, or engrave, depending on the type of accessory being used.
Learn more most the types of applications yous tin can do with a Drernel In the chart or visit Dremel.com to learn more than about our tools, accessories, and find project Inspiration.
GETTING STARTED
- CHARGE It! Fully charge the tool before employ (approximately 2 hours & 45 minutes). A green lite will illuminate from the indicator while charging, which will plough off one time fully charged. A cerise light volition turn on when battery is low. For optimal run-time, charge tool using a 5V/1a minimum ability adapter.
TIP: A red LED light will turn on when the tool stalls. If this happens, remove the tool from the material, close the tool off, & resume use without excess force per unit area. If stalling persists, consider using a different accessory, technique, or tool for the chore.
2. SELECT THE Right ACCESSORY
Your kit includes ii combinations of boom preparation accessories to utilize with your pet.
*Recommended maximum operating speed for pet grooming applications is x,000/min. Employ farthermost circumspection for higher speeds and limit the amount of time that the nail is exposed to the sanding surface. Use of higher operating speeds may cause heat buildup and injury to the pet. Always monitor pet for signs of discomfort and stop grooming if observed. Refer to Operating Speeds' section of instructional manual for proper tool speed setting.
3a. Irresolute THE SANDING DISC WITH THE PET GROOMING Zipper
- A. Disassemble the clear cap from the attachment by running the small knobs on the inside of the clear cap up forth the height adjustment guide
- B. Unlock the squeeze and open the attachment.
- C. Pull down the bound-loaded sleeve (ane) and remove sanding disc (2,3).
- D. Pull down the spring-loaded sleeve (i), place sanding disc on the mandrel (two) and align bow tie interface on bottom of sanding disc (3). Sanding disc should lock in identify.
- Eastward. Close the zipper around the threaded olfactory organ & ensure it is securely tightened.
- F. Put clear cap back on the zipper by running the small knobs along the meridian aligning guide until information technology is at Position 2. Yous will hear the cap click into place when fully installed.
3b. INSTALLING THE SANDING BAND AND OTHER ACCESSORIES
Loosen the collet nut past pressing downward on the shaft lock button & rotate collet nut by hand until the collet opens up to let an accessory to be placed in information technology. Once the accessory is placed in the collet, hold the shaft lock push downwardly & use the included collet wrench or EZ Twist Olfactory organ Cap (with integrated wrench) to tighten the collet nut & secure the accompaniment in the collet (Figure 3).
TIP: Dremel has 4 different size collets, your kit includes a ane/8″ shank size collet. Visit Dremel.com to observe other accessories that tin exist used with the Lite.
When changing accessories, insert the new one into the collet equally far as possible to minimize run out & unbalance. Avoid excessive tightening of the collet nut when there is no bit inserted (Figure 4). Always check that the accessory is securely installed earlier operating the tool.
TIP: If the collet is stuck to the collet nut & does not open up, preventing the accessory from being
4. FAMILIARIZE YOUR PET WITH THE TOOL
If you lot and your pet are new to Dremel pet nail grooming, start by easing into the process. Train your pet to feel comfortable with the tool running and work your style upwardly to nail trimming. This process may accept a couple of days or weeks. Every pet is unique. Residual bodacious that both y'all and your pet will be able to relax and even savour the grooming fourth dimension that y'all share together.
Tip: Before trimming your pet's nails, identify where the blast quick starts. Avoid cutting into the quick (Effigy 5). inserted, apply the shank of the accessory to gently loosen the collet from the collet nut.
five. Offset Training
If your domestic dog has long fur, band it dorsum to avoid it getting caught during trimming. If your dog has long fur on its paws or between the foot pads, trim the hairs first to lessen the adventure of catching on the sanding accompaniment. Alternatively, you can utilise an old sock to cover your pet's toe, pes, and leg and isolate the smash.
Support the toe and nail in one hand. Pushing gently on the bottom of the paw'southward pad extends the blast slightly for easier training. Gear up the tool speed to 1. Briefly trim the tips of each nail on i hand, and then the other, in several passes as needed. Spend no longer than iii seconds on each smash, assuasive time for the nails to cool. Don't employ excess pressure level; let the speed of the tool to do the piece of work.
TIP: Rule of thumb for the proper angle to trim a pet's nail is 45 degrees upwards from the lesser of the hand (Figure 6).
half-dozen. GIVE YOUR PET A Treat
Create a positive association with the nail grooming experience by praising & rewarding your pet with their favorite treat!
BEST PRACTICES & Additional TIPS
- For more than control during the grooming procedure, apply the "Golf Grip" method to hold the tool.
- To prevent overheating the tool, whenever possible, practise not grip the tool where information technology wouId block the ventilation openings.
- A reddish LED light will turn on when the tool stalls. If this happens, close the tool off – & resume utilise without excess force per unit area.
- Avoid engaging the shaft lock button while tool is in performance. Doing so volition event in astringent internal harm of the tool.
- Plough off tool before making any adjustments or changing accessories.
- Wear personal protective equipment. Depending on application, use dust mask, rubber glasses, or work gloves.
- To maximize the run time, use minimal pressure on the tool & use recommended speed setting for the application.
- Visit https://twww.dremel.com/en_US/back up/product-registration or submit the registration bill of fare included In your kit for the virtually upwards-to-dlate product and warranty Information.
NEW TO DREMEL?
Sign up for the Dremel Newsletter through our website for exclusive content, project inspiration, tips and more!
Our Dremel Experts are happy to help.
U.South.A.: one-800-437-3635
Check out WWW.DREMEL.COM
for project ideas, tips, & much more.
REVIEW US! * * * * * Share your review of this product on your retailer's website.
Read More than About This Manual & Download PDF:
Documents / Resource
Source: https://manuals.plus/dremel/cordless-pet-nail-grooming-kit-manual
0 Response to "How Do You Know the Battery Is Charged on the Dremel Pet Nail Grooming Kit"
Post a Comment